48V Input
12VDC, 50A Output - 600 Watts
Isolated EV DC/DC
Converter
Waterproof to 3.2ft (1m)
(IP65)
2~3W Idle Current Draw
 |
 |
Our best DC/DC converter is our Wimech series which have input voltages going from 48 Volts to 144 Volts (48V, 72V, 96V, 120V, & 144V) and output power of 600 Watts and 50 Amps.
They are in our USA Stock here in Utah and ready to be shipped quickly. The Isolated EV DC/DC Power Supply is waterproof to 3 ft. and has an IP rating of IP65.
Advanced high frequency technology is implemented to bring about high efficiency, stability, and a compact size. As it says in the product specifications about this technology, "The 600W series isolated DC/DC converter applies advanced technology and is configured specifically for electric vehicles. It is very suitable to supply power to the lamp and audio system as it is very stable and clean. The advantages of high efficiency, stability, and compact size, are achieved by adopting the advanced high frequency technology. It is sealed by silica glue to make it water and vibration proof, which ensures the stability of the vehicle in atrocious conditions. It also can be used as a charger to charge a 12V battery in the electric automobile according to the customer’s requirement. Current equalizer is built in, which makes converters work in parallel in order to enlarge the capability."
Call us now to find out more about the 600 Watt Isolated EV DC/DC Converter!
Input
|
Input
Voltage
|
48V (42V~60V)
|
|
Efficiency
|
95%
|
||
Output
|
Voltage
|
12V DC
|
|
Current
|
50A
|
||
Power
|
600W
|
||
Start
Delay
|
3 ~ 8s
|
||
Ripple
|
≤ 270mv
|
||
Current
Stabilization
|
≤ ± 1%
|
||
Voltage
Stabilization
|
≤ ± 0.5%
|
||
Cooling
Method
|
heat sink
|
||
CANbus
Protocol
|
No
|
||
Mechanical
Shock
|
Complies with SAEJ1378
|
||
Protection
|
Multi-Protection
|
Yes*
|
|
Automatic
Current Limiting
|
Yes**
|
||
Environment
|
Operation
Ambient Temperature
|
-40°C ~ 65°C
|
|
Storage
Temperature
|
-50°C~ 90°C
|
||
Relative
Humidity
|
≤ 90%
|
||
Air
Pressure
|
70 ~ 106kPa
|
||
Protection
Level
|
IP67
|
||
Safety
|
Dielectric
Strength
|
Isolated 36V-48V-70Vdc
|
|
Size
(L × W × H) inches
|
10 * 5.5 * 2.6
|
||
Size
(L × W × H) mm
|
254 * 140 * 66
|
||
Weight
(Lbs)
|
3.2
|
||
Weight
(Kgs)
|
1.5
|
||
*
Protection Features for your 600W Isolated EV DC-DC Converter
o
Input over or under-voltage
o
Output over or under-voltage
o
Over-temperature
o
Reverse connection
o
Phase failure
o
Short circuit protection
The
system will shut down, and return to normal operation after the fault is
cleared.
** The
output current stays fixed after it exceeds the set point.
***
Imposes 48Vdc between I/O and the chassis after shorting the input and output
for one minute. No breakdown or flashover.
No comments:
Post a Comment